Your position: Home / PLA PRO Filament / PLA PRO - Basic Colors

PLA PRO Filament - Basic Colors - Black

Brand: ZIRO
Material: PLA
Diameter: 1.75mm
Diameter Tolerance: ±0.02mm
Print Temp.: 190-220℃
Print Speed: 50-100mm/s
Platform Temp.: Depends on the platform: No need / 50-60℃
N.W.: 1kg
G.W.: 1.4kg
  • Color:
(12 available)
Please select the information you wantX
  • Description
  • Reviews
Wide range of filament
Wide range of filament
More materials, colors, more choices
All filaments are produced with environmentally friendly materials
Tangle free
Tangle free
We updated our production line to produce neat winding filament spools
Strict quality control to guarantee precise and consistent diameter
No bubble
No bubble
Dry filament, vacuum package with desiccant
Clog free
Clog free
Smooth extruding
No warp
No warp
Good adhesion to heat bed
Real manufacturer can support customized orders
Note: - The processing temperatures may vary depending on different 3D printers. - If there is a first layer adhesion issue, please check the setting temperature of the heat bed and re-level the print substrate to adjust the distance between the nozzle and the heat bed. In addition, putting on some glue may help. - A nozzle size of ≥0.4mm is recommended. Carbon fiber PLA filament needs a tougher nozzle. The carbon fiber in the filament could wear out the brass nozzle to a certain extent in a long-time printing. So, please replace a new brass nozzle when it’s worn out or use a steel nozzle instead.

If there is no print plan within a few days, retract the filament and take it off to protect the printer nozzle. Please store the used filament into the reseal bag (we've included a free reseal bag in each box) to keep it from moisture and dust.

If the filament cannot be extruded smoothly in a fully enclosed printer, please try again with the covers open.
The GID color filament means it will glow in the darkness after absorbing light first. You can expose it to sunlight/bright lighting light/UV light for 15-30 mins, then take it to a dark environment, it will glow. To avoid tangle at the beginning – Always remember to hold the end of the filament when you cut it at the start of using, please don’t let it scattered disorderly; To solve it when tangle happened once, please pull the stuck end back from underneath, and unwind several meters to sure the filament be sorted out orderly, the rest part should be no problem for printing. Normally, it will not happen again; When taking the filament off the printer, please make sure that the free end of the filament be inserted into the holes to avoid being tangled for next time use. Warranty term - We offer one-year warranty for this product. If you have any question, please feel free to contact us.
Average rating:
Share your thoughts with other customers
Write a review

Copyright © 2014-2021 ZIRO 3D Ltd. All Rights Reserved. POWERED BY UEESHOP